Professional Ceramic Coating Installers in

At OTL Detailing we offer an advanced ceramic coating service that provides a long lasting protection for your vehicles paintwork. This is the best solution to keep your car looking glossy, clean, & protected from environmental contaminants.

There are many detailers & ceramic coating distributors that make big claims about there products however at the end of the day if the coating is not properly applied then the product will fail to perform at the rate it’s supposed to or have the duration it’s said to have. And at that point you just wasted hundreds of dollars for nothing.

You HAVE to properly prepare the paint for Maximum results. Now, we understand that some customers really aren’t worried about it and they just want the hydrophobic properties on their vehicle even if its for a limited time and aren’t worried about paying the premium price for it. So although we strongly recommend every customer that wants a ceramic coating, to go through the prep. process, we also have a spray on alternative that is cheaper than the real thing. That will still do the job, just for a shorter period of time and without having to go through the prep process so naturally it will come out cheaper.

At OTL Detailing we put your paint through a prep. process before applying the coating which includes: washing, claying, & some form of paint correction to ensure the coating performs as intended.

This process can very depending on the condition of your car. For a properly maintained vehicle with the paint already in good condition, we could finish in a much shorter time period as it may only require a 1-step correction or light polish. For paint that is more heavily swirled and requiring a longer process, this can take up to 2-3 days of work.

The application process for a ceramic coating is a much longer and much more tedious process than applying any wax or sealant. One part of this is you have to be able to know when the coating has set on the paint so you can then buff it off. And the amount of time it takes to “set” can vary depending on the conditions you’re working in and what coating you’re using as well.

This is why it is very important to work in sections so you can properly analyze the coating as your going and you don’t miss any spots. Because if you buff off the coating too early there’s a potential that the coating has not been allowed ti fully set onto the paint, causing its durability to be compromised. And waiting too long can make it very difficult to remove.

Another big problem we see when people install ceramic coatings is “high-spots”. This is a clearly visible spot on the paint that was coated, but wasn’t thoroughly buffed off so you can see where it dried up almost leaving a smeared look.

If these “High-Spots” are caught not too long after the application then it might be simply be able to be buffed off. However if left untreated for days/weeks and it has already cured to the panel you now have to go over and polish that section again.

These are the major differences between a ceramic coating and a wax/sealant.